DELTA Q's

Where is DELTA manufactured?

DELTA is manufactured locally right here in Minnesota.

Does DELTA float?

Absolutely. 

How does DELTA attach?

DELTA attaches with two powerful suction cups specifically designed to accommodate the contoured surface of your boats hull. Delta can be attached and removed from your boat in seconds. Be sure to press in on the two blue levers before rotating them down into the locked position. This fully exhausts the air and water out of the cups ensuring maximum grip. Watch the installation video here... https://vimeo.com/189210991

How big is DELTA?

DELTA is about the size of a loaf of bread. Yum. Don’t let the size deceive you, DELTA delivers a world class wave in the most efficient way possible. This puts less load on the engine and the boats hull. 

It says it fits on most boats.  What does that mean?

DELTA will deliver a great wave on any boat. DELTA requires a location that is about 5 inches wide, 13 inches long and relatively flat. We haven’t tried every inboard boat but we’ve been able to find a place to put Delta to work on every boat we tested. We also offer a full 30 day return policy, less shipping, so give it DELTA a try and see what you think. If you're not 100% satisfied, send it back and we'll happily refund your purchase. 

Is steering affected by DELTA?

In general there is very little change to the boat’s handling with the DELTA in place.  However, we strongly suggest you test it yourself before you attempt to wakesurf or pick up riders from the water.

Does the boat need to be clean to attach DELTA?

Yes. If you store your boat in the water you may need to periodically clean the area where DELTA will attach. A 3M blue scratch-free scrubber works really well to remove the waterline algae that sometimes accumulates by the end of summer. Wax and polishes do not affect the gripping power of the suction cups.

Do you sell replacement parts for DELTA?

Absolutely. We know accidents happen and we want to get you back on the water fast. We offer replacement parts for all DELTA components. Email support@missionboatgear.com and please include your order number or receipt of purchase. We will send you a custom invoice that you can then pay online through our web store.